Pulsafeeder Pulsar Shadow Uživatelský manuál stáhnout pdf (Strana 31)

To replace the gearbox oil seal:

First drain the gearbox per the lubrication instructions. Remove the four gearbox bolts, and

withdraw the gearbox from the eccentric box, sliding it off the eccentric shaft. Remove the seal.

Lubricate the replacement with Pulsalube 8G gear oil and install by pressing into position.

Reinstall by reversing the disassembly procedure. Refill the gearbox with Pulsalube 8G gear oil

per Lubrication.

To replace the eccentric box seal:

First remove the gearbox per step 3 above. Remove the four bolts, which retain the eccentric side

cap to the eccentric box. Remove the eccentric side cap and withdraw the eccentric shaft.

Remove the seal. Lubricate the replacement with Pulsalube 8G gear oil and install by pressing it

into position. Reinstall by reversing the disassembly procedure. Refill the gearbox with

Pulsalube 8G gear oil per the lubrication instructions.

Figure 20

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Žádné komentáře

Pulsafeeder Pulsar Shadow Uživatelský manuál Strana 31